One of the most practical appliances in a home is a dryer. However, if they stop working, you must fix the underlying issues before you can use them again. Although the Samsung brand is well known for being among the most durable over time, they are nonetheless susceptible to damage. A malfunctioning dryer is causing a lot of people’s clothes to take longer to dry.
If you’re looking to cut repair costs, you should be aware of some quick fixes before you call a professional or think about replacing faulty parts. You may use the instructions here with the majority of Samsung dryers. This article will thoroughly examine the most likely cause of your Samsung dryer not heating up.
Why Is My Samsung Dryer Not Heating Heating Up?
When your Samsung dryer begins to take forever to dry clothing, then something’s up. The only problem? It’s not quite easy to immediately point out the source of the problem, but In 80% of situations, a burnt heating element in a dryer will be. Here are the most prevalent reasons why your Samsung dryer is not heating up:
1. Burnt Heating Element
Your Samsung dryer needs to produce heat to dry your clothing properly – that’s what the heating element is for.. Depending on the model you have, the heating element may differ. But in general, they all function in the same manner. How it works, the machine powers the heating element when it needs heat to dry your clothing while a blower fan forces the heated air from the heating element into the dryer.
Whatever you put in your Samsung dryer is dried out by the hot, blowing air. So if your Samsung dryer is taking too long to dry, there is an 80% likelihood that a burned-out heating element is to blame. If you check your Samsung dryer’s heating element using a multimeter or by sight, you should be able to determine whether or not that is the case.
The value on a multimeter should be close to 10 Ohms(resistance value) when you examine the heating element; it indicates that your heating element is in good operating order. No multimeter? You can use a spotlight to examine the entire heating element closely. Elements that are burned out will most likely smell burnt or have burn marks anywhere on them.
2. Burnt Thermal Cut-Off Fuse
At the heater assembly of your Samsung dryer is a thermal cut-off fuse that guards against overheating. The thermal cut-off fuse is basically a safety device that will burn out and prevent the dryer from heating up if temperatures go too high.
Fun Fact: There is a 10% probability that a burned thermal cut-off fuse in the heater component is the cause of a Samsung dryer not heating up.
The fuse burns out to protect the rest of the machine from damage whenever the temperature near the heater assembly exceeds acceptable levels. This kind of overheating frequently results from clogged dryer vents. The heater assembly overheats and causes the thermal cut-off fuse to trip if there is insufficient airflow to transfer heat away from the heating components.
3. Blocked Dryer Vent
A blocked air vent is a fairly common reason for a Samsung dryer not heating up sufficiently. The Samsung dryer’s venting feature enables moist air from wet garments to leave the appliance and go outside. A clogged vent may cause heating problems. The vent may occasionally become clogged as a result of prolonged use. Sometimes, tiny particles may become lodged in the air vent and lint filter, obstructing the passage of the airways.
4. Problem With Power Supply
A dryer consumes a lot of electricity, especially when the heating element is involved. The dryer’s heating element needs a constant 240V, two-phase power supply to provide heat. The dryer may be wired to two circuit breakers since it depends on a two-phase power source, which is why it fails.
When a breaker trips, for example, the dryer only gets half the power it requires (120V) and only from one phase. The heating element isn’t receiving enough power, so it won’t be able to produce any heat.
How to Fix Samsung Dryer That Has Heating Problem
These are simple DIY steps to fix the common problems causing a Samsung dryer not to produce heat:
1. Inspect Heating Element
It is always best to identify the issue before it worsens and prevents your Samsung dryer from heating. Before anything else, it’s best to inspect the heating element visually. A faulty heating element is fairly easy to spot – burn marks and all.
For specific instructions on where to find the heating element on a Samsung dryer, consult the user handbook. After inspecting visually, it looks like the heating element is good. It’s time to be doubly sure. Take the next steps:
- Cut the dryer’s power.
- Use a multimeter to check for continuity.
- It is better to get a new multimeter if the continuity test fails.
- If you get values less than 10 ohms, your heating element is faulty; 10 or above 10 values indicate that your heating element is in great shape.
2. Inspect the Thermal Cut-off fuse
You must also do a continuity test on the thermal fuse and check it using a multimeter. If the test results are negative, you should replace the thermal fuse. You should follow the procedures below to accomplish this.
- Remove the back panel to gain access to the Thermal Fuse.
- Find the fuse. It is typically close to the heating element or the blower.
- Make a continuity test with a multimeter.
- Replace the fuse if it fails the test.
- Even after taking the aforementioned actions.
3. Clear Clogs In Dryer Vent
If your Samsung dryer’s element and cut-off fuse are perfectly ok, the machine may have difficulty heating due to a clogged dryer vent.
The air vent can still become blocked even if cleaning the lint filter after each drying cycle helps avoid blockage. In this situation, the damp air cannot escape, leaving the clothing wet and preventing the dryer from drying them.
You can confidently assume that a blocked vent is responsible if you notice that the dryer drum is warm. Therefore, we recommend that you clean the dryer at least twice a year to prevent these problems.
4. Improper Power Supply
Verify that the setting on your circuit breaker is not too low, or it will trip incessantly. Also, modern Samsung dryers include an automatic shut-off option. In this manner, if the dryer is left on for an extended time, it will turn off automatically. You may look at the settings for your dryer’s electronic thermostat here.
When the temperature outside reaches at least 20°C, ensure it is set on heat. Double-check your dryer’s wattage as well. This information is often located on the dryer’s rear. However, you can also look at the label on the circuit breaker’s back. By looking at that number, you may find out your dryer’s maximum wattage. Verify that it has at least 100 watts.
If your Samsung dryer is still not heating up, it might be time to call a specialist. They’ll provide you with a simple solution right now.
How to reset the Samsung dryer?
For homeowners, the Samsung dryer repair procedure may seem daunting and difficult.
The good news is that homeowners may quickly reset their Samsung washers.
- Samsung dryers can be reset most effectively by turning them off at the mainboard and then holding down the power button for 10 seconds.
- The typical Samsung dryer issue is that it won’t heat up. In this situation, you must unlock the door, depress the power button for one minute, and then restart the device.
- Take the actions listed above to restore it to its default settings. Sometimes the Samsung dryer won’t turn on even after a reset. If this occurs, unplug the dryer, turn it off, and then plug it back in. And try once more.